Sale!

Kongsberg RMP200-8 | Remote Multi-Purpose Controller | In-Stock

Original price was: ¥999.00.Current price is: ¥888.00.

Kongsberg RMP200-8 | Remote Multi-Purpose Controller | In-Stock

  • Exact Model: Kongsberg RMP200-8
  • OEM Brand: Kongsberg Maritime
  • System Series: K-Pos / Dynamic Positioning & K-Chief Automation Architecture
  • Core Function: Functions as a localized remote processing node that gathers, conditions, and executes multi-channel field I/O signals across vessel automation networks.
  • Module Type: Remote Multi-Purpose Processor / I/O Controller Module
  • Defining Specs: 8-channel dedicated field interface capacity, dual 24 V DC redundant power inputs, 1500 V RMS galvanic channel-to-bus isolation.
Category:

Description

Kongsberg RMP200-8 | Remote Multi-Purpose Controller | In-Stock

 

Dynamic Product Introduction

Managing vessel propulsion feedback, thruster interface loops, or dynamic positioning sensors leaves zero margin for latency or module dropouts. The Kongsberg RMP200-8 serves as a high-reliability local processing node that gathers, conditions, and executes I/O logic right at the fieldbus edge. Rather than allowing localized wiring issues or channel noise to disrupt central vessel automation, integrating a fully load-tested controller module keeps data lines synchronized across your distributed network.

Engineered to endure the constant mechanical vibration, thermal cycling, and high electromagnetic interference of engine room spaces, the Kongsberg RMP200-8 features robust conformal coating and industrial-grade channel isolation. Its dual-power feeding architecture guarantees continuous node processing even if a main 24 V DC power circuit fails. For marine automation engineers executing dry-dock overhauls or urgent offshore maintenance swaps, this module provides the dependable processing foundation required under classification society standards.

RMP200-8

RMP200-8

Key Technical Specifications

  • Model Identification: Kongsberg RMP200-8
  • Module Type: Remote Multi-Purpose Controller / I/O Node
  • Channel Capacity: 8 Dedicated High-Integrity Field Channels
  • Operating Voltage: Dual 24 V DC inputs (18 V DC to 32 V DC operational range)
  • Current Consumption: Nominal 300 mA at 24 V DC
  • Isolation Level: 1500 V RMS channel-to-bus galvanic isolation
  • Operating Temperature: -15°C to +70°C (5°F to 158°F)
  • Enclosure Rating: IP20 DIN-rail or baseplate mount (cabinet installation)

 

Global Sourcing & Live-Test SOP (Transparency Core)

To guarantee operational readiness before hardware goes aboard working vessels, every unit undergoes a comprehensive multi-step physical and live diagnostic protocol prior to dispatch:

  • Inbound Verification: Serial numbers are validated against Kongsberg OEM trace records, structural integrity of terminal connectors is inspected, and conformal coating quality is checked under UV light.
  • Live Simulation: The module is mounted inside an authentic Kongsberg test chassis to verify protocol handshakes and processor initialization under active controller polling.
  • Diagnostics: Multi-channel loopback tests are executed while injecting high-frequency noise to verify signal conditioning and processing accuracy across all 8 channels.
  • Environmental Heat Run: The unit undergoes a 24-hour continuous burn-in cycle at 55°C inside an environmental chamber while monitoring real-time packet loss.
  • Final Prep: Onboard hardware revisions are logged on the inspection certificate, terminal contacts are treated with anti-corrosion protection, and the module is sealed inside ESD-shielded packaging.

 

The Field Engineer’s Pitfall Guide

Marine Power Rail & Earthing Hazard

Ensure both primary and secondary 24 V DC supply feeds originate from properly isolated, grounded marine power supplies to prevent ground loops across the fieldbus shield plane.

❗ Firmware and Node ID Mismatches: Swapping the Kongsberg RMP200-8 without matching its onboard node address hardware switches or software ID parameters will prevent the central controller from recognizing the unit. Always document the legacy module’s DIP switch configuration before removing it from the DIN rail.

❗ Vibration-Induced Terminal Wear: In high-vibration compartments near main engines or thruster tunnels, un-torqued terminal connections back out over time. —Honestly, I’ve seen vessel commissioning delayed by two days simply because an un-torqued signal wire backed out under heavy sea trials.

❗ Backplane Pin Alignment During Swaps: Inserting the unit off-axis during cabinet maintenance can bend backplane interface pins inside the baseplate socket. Always align the module smoothly along its cabinet guide rails prior to engaging retaining latches.

 

Intent-Driven FAQ

Will swapping out the Kongsberg RMP200-8 affect running dynamic positioning loops?

Replacing a live controller module should only be performed while the vessel is in a safe operational state or when redundant control paths are verified active. Always transfer control to secondary systems prior to unseating power or bus cables.

Does this module require software flashing before installation?

In most standard replacement scenarios, the Kongsberg RMP200-8 functions as an I/O node whose parameters are pushed automatically by the central system processor upon bootup, provided the hardware node address is set correctly.

How do I confirm power rail redundancy is operating on the module?

Check the front-panel status LEDs. The Kongsberg RMP200-8 features dedicated status indicators for both primary and secondary 24 V DC inputs; a missing LED immediately signals a blown line fuse or power supply failure. (Verification: Both PWR 1 and PWR 2 LEDs illuminate solid green.)

What coverage applies to reconditioned surplus units?

All reconditioned and factory-sealed units include a comprehensive 1-year replacement warranty covering internal processing logic, port isolation, and power circuit stability.

Can this module be mounted in open engine room spaces?

No. The unit carries an IP20 protection rating and must be housed inside an IP54 or higher sealed enclosure to protect against moisture, oil mist, and salt air exposure.

Business Card