Description
Schneider Electric XBTF011310 | Magelis XBT-F 5.7″ Keypad HMI In-Stock
Dynamic Product Introduction
Operating a processing line or packaging system with a dead display, unresponsive function keys, or failing serial communication on a legacy operator panel stops production cold. The Telemecanique / Schneider Electric XBTF011310 serves as a ruggedized human-machine interface within the classic Magelis XBT-F architecture. Built with a high-contrast 5.7-inch monochrome graphic matrix and tactile matrix membrane keys, it provides machine operators with immediate visual diagnostics, real-time alarm handling, and precise setpoint entries in harsh factory floor environments.
When an operational terminal suffers CCFL backlight burnout, membrane keypad wear, or serial transceiver breakdown mid-shift, sourcing an exact-fit Schneider Electric XBTF011310 replacement unit keeps panel maintainability on schedule. Installing a fully bench-tested replacement module enables electrical technicians to drop a working display directly into existing cabinet cutouts without modifying mounting dimensions or re-routing 24 VDC power and communication cables. Replacing a degraded terminal immediately restores sharp screen readability, tactile button actuation, and stable controller networking.
XBTF011310
Key Technical Specifications
- Model Designation: XBTF011310
- Manufacturer: Telemecanique / Schneider Electric
- Display Screen: 5.7-inch CCFL backlit monochrome graphic LCD
- Display Resolution: 320 x 240 pixels (QVGA)
- Operator Input: Integrated membrane keypad (function keys + numeric data entry keys)
- Operating Voltage: 24 VDC (18–30 VDC acceptable window)
- Onboard Communication Interfaces: 1 x SUB-D 25-pin female serial port (RS-232C / RS-485, Modbus / Uni-TE), 1 x RJ45 printer/auxiliary port
- Memory Expansion: Slot for PCMCIA / Compact Flash memory card (e.g., XBTMEM16)
- Front Bezel Protection: IP65 / NEMA 4X (indoor panel enclosure rating)
- Operating Temperature Range: 0°C to +50°C (32°F to 122°F)
Global Sourcing & Live-Test SOP (Transparency Core)
Procuring legacy HMI units like the Telemecanique XBTF011310 requires strict bench diagnostic screening to verify CCFL backlight longevity, key matrix contact conductivity, and serial communication port stability. Every incoming terminal passes through an intensive five-stage quality assurance protocol:
- Inbound Verification: Part numbers (XBTF011310 / XBT-F011310), serial tags, and front bezel gaskets are inspected against Schneider Electric manufacturing standards. Technicians examine the housing studs, rear connector ports, and keypad overlay for cracks or chemical erosion.
- Live Simulation: The XBTF011310 is mounted in a diagnostic test stand and powered using a regulated 24 VDC power supply.
- Diagnostics: Technicians execute multi-screen test patterns to evaluate CCFL backlight brightness and matrix contrast. Every membrane key is actuated sequentially to confirm positive tactile feedback and signal response. Onboard RS-232 and RS-485 serial ports undergo active packet transfer tests against a Modicon PLC controller using XBTL1000 application routines. The unit then completes a 24-hour thermal chamber burn-in run to rule out power supply board drift or display flickering under operational heat.
- Final Prep: Internal runtime memory is cleared to factory baseline states, terminal connectors are cleaned, protective window film is applied, and the terminal is wrapped in static-shielding ESD packaging before dispatch.
The Field Engineer’s Pitfall Guide
- ❗ Connecting 120/230 VAC Line Voltage: —though some older industrial terminals accept AC power, the XBTF011310 requires a 24 VDC power supply. Applying line AC voltage directly to the 24 VDC power input terminals will permanently destroy the internal power supply board and main logic assembly.
- ❗ Serial Port Pinout Misconfigurations on SUB-D 25: The 25-pin multi-protocol serial port supports both RS-232C and RS-485 differential signals. Using improperly wired adapter cables or incorrect pin jumpers when connecting to non-Schneider PLCs will result in immediate communication timeout alarms.
- ❗ Over-Torquing Rear Mounting Clamps: Cranking down excessively on the outer mounting clips will bow the plastic housing frame, distorting the front IP65 sealing gasket and causing premature failure of adjacent keypad matrix tracks.
Intent-Driven FAQ
Will replacing an XBTF011310 terminal require re-downloading the application project file?
Yes. Surplus and pre-owned HMI panels arrive cleared to baseline factory memory states. You must download your compiled application screen project file using XBTL1000 software via the serial programming cable or load it directly using an XBTMEM16 expansion memory card.
Can the CCFL backlight on the XBTF011310 be adjusted or replaced?
Screen contrast and backlight timeout settings can be adjusted through the terminal’s built-in system setup menu. If the backlight lamp fails completely (resulting in a dark display while status LEDs stay lit), the internal backlight assembly or power inverter board must be serviced.
What protocols does the onboard 25-pin serial port support?
The serial port natively supports Schneider Electric Uni-TELWAY and Modbus (RTU/ASCII) protocols, as well as third-party PLC drivers (such as Allen-Bradley DF1, Siemens PPI/MPI, and Omron Host Link) when configured in the XBTL1000 software project.
Why is the terminal stuck on a blank screen with a flashing communication LED during boot?
A flashing communication LED paired with a blank display during boot typically indicates that the panel is in bootloader/transfer mode, waiting to receive system firmware or an application project file download from a connected PC running XBTL1000.
What warranty coverage comes with pre-inspected replacement terminals?
All verified Schneider Electric / Telemecanique XBTF011310 operator panels come backed by a comprehensive 1-year replacement warranty. If the unit experiences display failure, keypad matrix degradation, or communication port faults under standard operating conditions within 12 months, it is swapped directly from available warehouse inventory stock.
