Sale!

Rexroth MSK061C-0600-NN-M1-UP0-NNNN | IndraDyn S AC Synchronous Servo Motor

Original price was: ¥999.00.Current price is: ¥888.00.

Rexroth MSK061C-0600-NN-M1-UP0-NNNN | IndraDyn S AC Synchronous Servo Motor

  • Exact Model: MSK061C-0600-NN-M1-UP0-NNN
  • Material Part Number: R911317019 / R911 series match
  • OEM Brand: Bosch Rexroth
  • System Series: IndraDyn S / MSK Servo Motor Series (Size 061, Length C)
  • Core Function: Converts high-frequency 3-phase AC PWM drive commands into high-precision, low-cogging rotary motion for multi-axis CNC machines, printing presses, and automated assembly stands.
  • Module Type: AC Synchronous Servo Motor with Optical Multiturn Encoder
  • Defining Specs: 6,000 RPM maximum speed, M1 optical multiturn encoder (EnDat 2.1), keyway shaft with shaft seal (UP0), 3-phase AC synchronous design, IP65 protection rating.
Category:

Description

Rexroth MSK061C-0600-NN-M1-UP0-NNNN | IndraDyn S AC Synchronous Servo Motor

 

Dynamic Product Introduction

Automation integration engineers managing high-speed gantry loaders, packaging axes, or semiconductor pick-and-place systems know how critical motor feedback resolution and thermal dissipation are to motion precision. When an active axis experiences optical encoder failure, winding insulation breakdown, or mechanical bearing seizure, replacing the motor with an exact model match is vital to restoring axis control without re-commissioning drive parameters or modifying mechanical mounting flanges.

The Bosch Rexroth MSK061C-0600-NN-M1-UP0-NNNN is a compact AC synchronous servo motor from the IndraDyn S family. Engineered to pair with IndraDrive controllers (such as the HCS01.1E-W0018 or HCS02 series), this motor features a 6000 RPM speed rating and an M1 optical multiturn encoder (supporting EnDat 2.1 protocol for absolute position retention without battery backup). Equipped with a standard keyed drive shaft and a high-grade radial shaft sealing ring (UP0 variant), the MSK061C delivers high torque density, low inertia, and IP65 environmental protection under continuous production workloads.

MSK061C-0600-NN-M1-UP0-NNN

MSK061C-0600-NN-M1-UP0-NNN

Key Technical Specifications

  • Motor Size & Length: Frame size 061, Stack length C
  • Maximum Speed (n_{max}): 6,000 RPM
  • Winding Code: 0600 (Optimized for 400/480 V 3-phase drive supplies)
  • Cooling Type: NN (Natural convection / surface cooling)
  • Encoder System: M1 (Optical encoder, multiturn absolute, EnDat 2.1 interface, 128 signal periods)
  • Electrical Connection: U (Rotatable power/encoder single or dual plug connectors)
  • Shaft Configuration: P (Shaft with keyway per DIN 6885-1, with shaft sealing ring)
  • Holding Brake: 0 (Without integrated holding brake)
  • Design Suffix: NNN (Standard factory base design)
  • Ingress Protection Rating: IP65 complete unit seal rating
  • Thermal Protection: Integrated KTY84 / PT1000 temperature sensor embedded in stator windings

 

Global Sourcing & Live-Test SOP (Transparency Core)

Sourcing replacement servo motors requires rigorous mechanical and electromechanical diagnostics to guarantee encoder alignment, winding insulation, and smooth shaft rotation.

Inbound Verification & Traceability

  • Paperwork Audit: Cross-referencing physical serial numbers and full type code strings against Bosch Rexroth production logs to confirm hardware build code and encoder revision.
  • Physical Inspection: Detailed check of shaft keyway tolerances, radial shaft seal integrity, mounting flange plane alignment, and circular power/encoder connector pin conditions.

Live Bench Simulation & Diagnostics

  • Winding Insulation & Resistance Test: Phase-to-phase resistance balance checking and 1,000 V DC Megger testing to confirm zero winding leakage or insulation breakdown.
  • Encoder Feedback & Alignment Test: Interfaced with an IndraDrive test stand (or specialized encoder diagnostic unit) to verify EnDat 2.1 multiturn count, absolute position zeroing, and signal quality across full rotation.
  • Dynamic Servo Drive Run: Motor is coupled to an IndraDrive Cs converter to run high-speed forward/reverse velocity steps up to 6,000 RPM while observing torque current draw, back-EMF symmetry, and noise floors.
  • 24-Hour Stress Run: Motor undergoes a 24-hour thermal chamber test under continuous load cycles to confirm thermal dissipation, bearing stability, and sensor linearity.

Final Prep

  • Shaft & Connector Protection: Installing protective caps on electrical connectors and applying rust-inhibitive coating to the exposed shaft and keyway.
  • ESD & Heavy-Duty Packaging: Unit is suspended in high-density foam packaging before double-boxed shipping.

High-Voltage Electrical Hazard

Always disconnect main 3-phase AC input power and 24 V DC control power from the host IndraDrive converter and wait at least 5 minutes before disconnecting or connecting motor power cables. Spinning the motor shaft manually while disconnected can generate hazardous back-EMF voltages across open power pins.

 

The Field Engineer’s Pitfall Guide

  • ❗ Shaft Seal Lubrication & Dry Running: The “UP0” designation includes a synthetic radial shaft seal ring. Running the motor at high RPM without proper gearbox oil or grease lubrication on the seal lip can cause thermal friction wear, destroying the seal lip and compromising IP65 protection.
  • ❗ Never Force Couplings onto the Keyed Shaft: Hammering or forcing belt pulleys or rigid shaft couplings onto the keyed shaft will transfer axial impact loads directly into the internal precision optical encoder disk, shattering the glass scale or throwing off factory alignment. Always use a mechanical drawing tool or heat expansion for coupling installation.
  • ❗ Matching Drive Encoder Parameters: The “M1” optical multiturn encoder stores absolute zero position and motor electronic nameplate data (Data Memory). When replacing a motor, perform an absolute encoder reference adjustment (command C0700 / G320) in IndraWorks to sync physical machine zero with the host drive controller.

 

Intent-Driven FAQ

Will swapping out an MSK061C-0600-NN-M1-UP0-NNNN require re-entering motor parameters?

No. IndraDrive systems automatically read the motor’s internal electronic nameplate data stored inside the M1 optical encoder memory upon startup. However, you must execute the machine’s absolute encoder homing procedure in IndraWorks to establish axis home.

Can this motor be used with third-party servo drives?

Yes, provided the third-party drive supports 3-phase AC permanent magnet synchronous motors, EnDat 2.1 optical feedback protocol, and accommodates the motor’s voltage/current ratings.

What is the difference between an M1 encoder and an S1 encoder on MSK motors?

  • M1: Optical multiturn absolute encoder (tracks position over multiple revolutions without battery backup).
  • S1: Optical singleturn absolute encoder (tracks position only within one 360-degree revolution).

What mounting orientation is supported by this motor?

The MSK061C supports all standard mounting positions (IM B5 flange mount, vertical shaft up, vertical shaft down) provided liquid entry along the shaft seal is managed in accordance with IP65 guidelines.

What warranty coverage is provided on replacement units?

All verified Bosch Rexroth MSK061C-0600-NN-M1-UP0-NNNN servo motors include a standard 12-month full-replacement warranty covering stator windings, optical feedback encoders, bearings, and shaft seals.

If you need assistance verifying encoder alignment procedures in IndraWorks, checking shaft seal replacement intervals, or pairing this motor with an HCS01 drive, let me know your drive model details and I can assist with the installation.

Business Card