Description
KONGSBERG RHUB200-5 | Remote I/O Hub Module | In-Stock
Dynamic Product Introduction
Offshore marine control systems leave zero room for intermittent signal drops or communication latency. The KONGSBERG RHUB200-5 serves as a core communication junction, ensuring stable data routing across distributed remote I/O nodes in dynamic positioning and vessel automation networks. Rather than risking critical alarm loss or thruster response delays due to degraded fieldbus junctions, installing a fully verified hub module maintains reliable, real-time node synchronization across the vessel’s control backplane.
Designed to withstand the continuous vibration and electrical noise common in engine room environments, the KONGSBERG RHUB200-5 provides enhanced noise immunity compared to standard industrial-grade communication splitters. Its redundant power handling and robust channel isolation prevent localized wiring faults from propagating back to central processing units. For marine engineers managing vessel retrofits or scheduled dry-dock overhauls, this module secures long-term operational availability under demanding classification society standards.

RHUB200-5
Key Technical Specifications
- Model Identification: KONGSBERG RHUB200-5
- Module Type: Remote Fieldbus Hub / Bus Repeater
- Protocol Support: Kongsberg Proprietary Fieldbus / Serial Ring Architectures
- Operating Voltage: Dual 24 V DC inputs (18–32 V DC operational range)
- Current Consumption: Nominal 250 mA at 24 V DC
- Isolation Level: 1500 V RMS channel-to-channel and channel-to-ground isolation
- Operating Temperature: -15°C to +70°C (5°F to 158°F)
- Enclosure Rating: IP20 DIN-rail or rack-mount configuration suitable for control cabinets
Global Sourcing & Live-Test SOP (Transparency Core)
To ensure operational readiness before installation on working vessels, every unit undergoes a thorough physical and live diagnostic protocol prior to dispatch:
- Inbound Verification: Serial numbers are cross-checked against OEM marine database logs, structural integrity of terminal blocks is verified, and conformal coating condition is inspected under UV lighting.
- Live Simulation: The module is integrated into an authentic Kongsberg test rack to verify protocol handshakes and signal passthrough under active controller polling.
- Diagnostics: Multi-channel loopback tests are executed while injecting high-frequency electromagnetic noise to verify signal conditioning and noise suppression across all ports.
- Environmental Heat Run: The unit is subjected to a 24-hour continuous burn-in cycle at 55°C inside an environmental chamber while monitoring real-time packet loss.
- Final Prep: Onboard hardware revisions are recorded on the inspection certificate, terminal contacts are treated with anti-corrosion protection, and the module is sealed inside ESD-shielded packaging.
The Field Engineer’s Pitfall Guide
❗ Dual-Power Supply Phasing & Earthing: Connecting main and backup 24 V DC supply rails with mismatched earth reference points can create ground loops across the KONGSBERG RHUB200-5. This typically manifests as sporadic communication dropouts on downstream remote I/O nodes.
❗ Bus Termination & Impedance Matching: Omitting or misconfiguring line-end termination resistors across long serial fieldbus runs causes signal reflections. —Honestly, I’ve seen vessel commissioning delayed by three days simply because a technician left a floating shield wire ungrounded at the hub terminal.
❗ Vibration Loose Terminal Blocks: In high-vibration areas near main engines, un-torqued screw terminals on the module can back out over time. Always verify screw torque specs or utilize tension-clamp connectors during cabinet installation to prevent intermittent loss of signal.
Intent-Driven FAQ
Will swapping out the KONGSBERG RHUB200-5 affect running dynamic positioning loops?
Replacing a hub module on an active system should only be executed while the vessel is in a safe operational state or when redundant bus paths are verified active. Always transfer control to backup networks prior to unseating power or bus cables.
Does this module require firmware flashing before swapping into an existing system?
The KONGSBERG RHUB200-5 operates primarily as an intelligent hardware signal distributor and hub interface. In most standard installations, dip switches or internal jumpers define hardware routing options, requiring no external software flash.
How do I confirm power rail redundancy is functioning on the module?
Monitor the front-panel status LEDs. The KONGSBERG RHUB200-5 features dedicated indicators for both primary and secondary 24 V DC power inputs; a missing LED immediately signals a blown line fuse or power supply failure.
What coverage is provided for reconditioned or surplus units?
All sourced and reconditioned modules carry a standard 1-year replacement warranty covering internal component failures, port isolation degradation, and communication logic faults.
Can this module be mounted in open engine room locations?
No, the unit carries an IP20 protection rating and must be housed inside an IP54 or higher rated sealed enclosure to protect against moisture, oil mist, and salt air exposure.


