Description
SIMCO F267 4000636 | Static Eliminator Power Supply Unit
Dynamic Product Introduction
Static discharge problems rarely announce themselves. A production line may continue running while contamination, material attraction, handling issues, or electronic damage slowly increase.
The SIMCO F267 4000636 is a high-voltage power supply designed for static elimination systems. It provides the electrical output required by compatible ionizing bars and static neutralization equipment used in manufacturing environments.
The F267 4000636 operates from a 230 VAC supply and delivers approximately 7.5 kV RMS output for static control devices. It is commonly applied in industries where controlling electrostatic charge improves process stability, product handling, and contamination management.
Unlike a standard low-voltage power supply, this unit is part of a high-voltage ionization system. The replacement decision depends on matching output voltage, connected static eliminator type, cable arrangement, and installation requirements.
In field maintenance, the common mistake is treating static control equipment as a simple plug-in replacement. The power unit, ionizing bar, cable condition, and grounding arrangement all work together.
F267 4000636
Key Technical Specifications
- Model: F267 4000636
- Manufacturer: SIMCO-Ion
- Product Type: Static Eliminator Power Unit
- Series: F267 Series
- Input Voltage: 230 VAC, 50/60 Hz
- Input Current: Approximately 0.12 A
- Output Voltage: 7.5 kV RMS
- Maximum Output Current: 5 mA
- Application: Static neutralizing bars and ionizing devices
- Installation Type: Industrial cabinet or machine-mounted installation
- Protection Function: Current-limited high-voltage output design
- Compatible Equipment: SIMCO static elimination products within supported F-series applications
Global Sourcing & Live-Test SOP (Transparency Core)
For surplus SIMCO F267 4000636 inventory, a visual inspection is not enough.
High-voltage static control equipment can show normal external condition while having internal output instability, insulation degradation, or connection problems.
Inbound Verification
Each incoming 4000636 unit should receive:
- Exact model number confirmation
- Serial number recording
- Nameplate inspection
- Housing condition check
- Terminal inspection
- Connector condition review
Inspection points:
- AC input terminals
- High-voltage output connection
- Housing cracks
- Burn marks
- Previous repair evidence
The correct voltage class must be confirmed before installation. A 230 VAC unit should not be substituted with a different voltage version without engineering approval.
Live Simulation
A proper test setup should include:
- Controlled 230 VAC supply
- Insulation-safe test environment
- Compatible static eliminator load
- High-voltage measurement equipment
Test sequence:
- Apply rated input voltage.
- Verify power-up behavior.
- Check output stability.
- Confirm connection to compatible static elimination equipment.
- Monitor abnormal heating or noise.
A functional test should verify that the power unit can energize the connected ionizing device correctly.
Diagnostics
Recommended equipment:
- Fluke multimeter for input verification
- High-voltage test equipment
- Insulation inspection tools
- Visual inspection equipment
Diagnostic checks:
- AC input stability
- Output presence
- Connection integrity
- Housing temperature
- Abnormal discharge indications
Static control systems depend heavily on correct cable routing and grounding. A good power unit can still perform poorly if the connected hardware has contamination or insulation problems.
Final Preparation
Before shipment:
- Record model and serial information.
- Document test results.
- Protect high-voltage connectors.
- Apply ESD-safe packaging where required.
- Seal the unit against transport damage.
For replacement inventory, traceability reduces commissioning delays.
The Field Engineer’s Pitfall Guide
❗ Do not replace the 4000636 without checking the connected ionizer load.
The power unit is designed for specific static elimination devices. Connecting incompatible bars or excessive loads can create output problems. I have seen production teams replace a power unit repeatedly when the actual fault was a damaged static bar cable.
❗ Do not ignore input voltage differences.
The version is designed for 230 VAC operation. Installing a wrong voltage variant can cause immediate failure or unsafe operating conditions.
❗ Do not overlook grounding and cable condition.
Static elimination depends on proper installation. Poor grounding, damaged high-voltage cables, or contaminated ionizing points can reduce performance even when the power unit is functioning.
Intent-Driven FAQ
What is the SIMCO 4000636 used for?
The SIMCO 4000636 is a high-voltage power supply used to operate compatible static elimination equipment in industrial manufacturing applications.
Is the 4000636 a PLC or automation controller?
No. It is a static control power unit, not a PLC, DCS module, or safety controller.
What voltage does the 4000636 output?
The unit provides approximately 7.5 kV RMS output for compatible static elimination devices.
Can I replace my existing 4000636 directly?
Usually, but verify:
- Input voltage rating
- Connected static eliminator model
- Cable compatibility
- Installation requirements
- Output specifications
What should be tested before installing a used 4000636?
Recommended checks include:
- AC input verification
- Output function test
- Housing inspection
- Connection inspection
- Static eliminator compatibility check
Why would a new power unit still fail to remove static?
Possible causes include:
- Damaged ionizing bar
- Poor grounding
- Contaminated electrodes
- Incorrect cable connection
- Excessive installation distance
Does the 4000636 require special handling?
Yes. It is a high-voltage device. Testing and installation should follow proper electrical safety procedures.
Procurement verdict: The SIMCO 4000636 is a dedicated static elimination power unit for maintaining existing industrial charge-control systems. Its replacement value depends on matching the complete static control setup, not only the part number.
Before purchasing, verify 4000636 voltage rating, connected ionizer type, cable condition, and application requirements to avoid unnecessary downtime.
