Description
Bartec 07-7311-97WP5400 | Explosion-Proof Industrial Tablet
Product Introduction
When field engineers need to pull up complex CAD schematics or adjust control loops while standing inside a live petrochemical processing zone, standard commercial hardware becomes an immediate safety hazard. The Bartec 07-7311-97WP5400 is not an off-the-shelf consumer slate; it is a heavy-duty, explosion-proof tablet engineered from the ground up to operate safely in volatile atmospheres—though managing battery charging protocols outside the hazardous perimeter is vital.
This unit merges robust physical housing construction with a high-performance Intel Atom quad-core processing architecture. It allows operators to run full Windows-based enterprise applications on the plant floor, bridging the gap between central control rooms and remote field assets without risking ignition sparks or thermal runaway.
07-7311-97WP5400
Key Technical Specifications
| Parameter | Value |
| Operating System | Windows 10 IoT Enterprise |
| Processor | Intel Atom x7-Z8750 Quad-Core (up to 2.56 GHz) |
| Memory (RAM) | 4 GB LPDDR3 |
| Storage | 128 GB Solid State Drive (SSD) |
| Display Panel | 10.1-inch Capacitive Multi-Touch, 1920 x 1200 Full HD |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g/n/ac, Bluetooth |
| Certifications | ATEX / IECEx Zone 1/21, UL Class I, II, III Div 1 |
| Physical Dimensions | 290 mm x 199 mm x 27 mm (Weight: ~2.3 kg) |
Application Scenarios & Pain Points
- Offshore Oil Rig Inspections: Technicians performing safety audits on drilling platforms face corrosive salt air and explosive gas risks. The ruggedized chassis and Zone 1 certification allow real-time database logging right at the wellhead.
- Refinery Catalyst Regeneration: Monitoring chemical reactor parameters typically forces engineers to walk back to clean control trailers. This tablet brings the SCADA client interface directly to the vessel side, reducing response times during critical adjustments.
- Pharmaceutical Cleanroom Batch Tracking: Plant floors requiring strict ingress protection and mobile data entries benefit from a sealed, wipe-down enclosure that handles heavy sanitation routines without failing.
QA & Live Testing SOP (Trust Signal)
Because explosion-proof hardware governs life-safety parameters in hazardous plants, surplus or replacement units undergo comprehensive benchmark tracking. Our technicians verify the integrity of the intrinsic safety barriers, inspect the perimeter o-ring seals for micro-cracks that compromise the IP rating, and run a full thermal stress cycle. We validate touchscreen multi-touch accuracy across the entire 10.1-inch glass matrix and test Wi-Fi handshake stability under simulated signal attenuation.
Field Engineer’s Pitfall Guide
- ❗ Hazardous Area Battery Swapping: Never attempt to swap the battery pack while standing within an active Zone 1 atmosphere. Doing so can cause an electrical arc and trigger an immediate plant emergency.
- ❗ Peripheral Port Exposure: Ensure the protective port covers are firmly bolted down before entering wet or dusty environments. Leaving a USB or data port unsealed instantly voids the unit’s ingress protection and hazardous safety rating.
- ❗ Proprietary Charging Docks: Do not attempt to use standard commercial USB-C power bricks inside hazardous boundaries; charging must be handled via certified safe-area peripheral cradles or approved power supplies.
Intent-Driven FAQ
- Can I use this tablet in a Class I, Division 1 hazardous location?
Yes. The unit carries international explosion protection ratings, including ATEX/IECEx Zone 1/21 and UL Class I, II, III Division 1 certifications.
- What software environment does it run out of the box?
It runs on Windows 10 IoT Enterprise, making it fully compatible with standard corporate domain controllers, VPNs, and legacy SCADA client software.
- Is the internal SSD and RAM upgradeable in the field?
No. To maintain its strict explosion-proof certification and hermetic seal, the internal components are permanently potted or secured, preventing modular field upgrades.
- What should I do if the touchscreen becomes unresponsive in extreme cold?
The unit is rated down to -20°C, but extreme cold can sluggishly impact capacitive layers. Ensure operators wear specialized capacitive-compatible industrial gloves designed for low-temperature touchscreens.
- Are replacement batteries readily available?
Yes, though they must be procured as OEM-certified explosion-proof assemblies to maintain compliance with hazardous location safety approvals.
