Sale!

GE S739DVR-RST1 | Fiber Optic Video/Data Receiver | In-Stock

Original price was: ¥999.00.Current price is: ¥888.00.

GE S739DVR-RST1 | Fiber Optic Video/Data Receiver | In-Stock

  • Exact Model: GE S739DVR-RST1
  • OEM Brand: General Electric (GE Security / Interlogix / UTC Fire & Security)
  • System Series: EST / IFS Fiber Optic Transmission Series
  • Core Function: Receives high-speed optical video and bi-directional serial data signals over fiber optic cable, converting them back into analog composite video feeds and RS-232 / RS-422 / RS-485 control telemetry for monitoring stations.
  • Module Type: Fiber Optic Video Receiver & Bi-Directional Data Node (Rack Card / Standalone Format)
  • Defining Specs: 1-channel composite video receiver, 1-channel bi-directional data transmission, ST optical connectors, 850/1300 nm or 1310/1550 nm operating wavelengths, 12 V DC / 24 V AC power support.
Category:

Description

GE S739DVR-RST1 | Fiber Optic Video/Data Receiver | In-Stock

 

Dynamic Product Introduction

Delivering crystal-clear video telemetry and responsive pan-tilt-zoom (PTZ) control from remote site cameras to central security desks requires high-grade optical receivers. The GE S739DVR-RST1 provides a high-integrity fiber optic receiver and bi-directional data interface module designed to pair seamlessly with corresponding field transmitters. Sourcing an exact-model replacement ensures instant optical link lock, exact impedance matching, and seamless chassis insertion without needing cable plant overhauls or system re-configurations.

Engineered to operate reliably in high-density rack frames or remote field enclosures, the GE S739DVR-RST1 features wide dynamic range optical receiving stage circuits that eliminate video tearing, ghosting, or data signal latency. On-board diagnostic LEDs give instant status indication for optical power link state, video signal detection, and serial data transmission. For security automation engineers, electrical contractors, and plant technicians maintaining legacy GE / IFS fiber transmission backbones, deploying a fully load-tested replacement receiver guarantees continuous video clarity and uninterrupted control telemetry.

S739DVR-RST1

S739DVR-RST1

Key Technical Specifications

  • Model Identification: GE S739DVR-RST1
  • System Platform: GE Security / EST / IFS Fiber Optic Transmission Systems
  • Video Receiver Channel: 1 Channel Composite Video (NTSC / PAL / SECAM compatible)
  • Data Interface: 1 Channel Bi-Directional Data (Selectable RS-232, RS-422, or 2-wire/4-wire RS-485)
  • Optical Interface: ST Fiber Connectors
  • Operating Voltage: 12 V DC / 24 V AC standalone, or powered directly via IFS rack chassis backplane
  • Video Signal-to-Noise Ratio (SNR): > 60 dB at nominal optical path loss
  • Operating Temperature Range: -40°C to +75°C (-40°F to +167°F)
  • Form Factor: Industrial rack-card insertion module (compatible with standard 19-inch IFS card cages)

 

Global Sourcing & Live-Test SOP (Transparency Core)

To guarantee 100% out-of-the-box performance prior to field installation, every reconditioned or new-surplus GE receiver module undergoes a rigorous 5-stage physical and electrical diagnostic protocol before dispatch:

  • Inbound Visual & Physical Inspection: Microscopic inspection of ST optical port ferrule integrity, check of DIP switch mechanical action, inspection of gold-plated card-edge connectors, and verification of model label S739DVR-RST1.
  • Optical Sensitivity & Dynamic Range Testing: Optical attenuators inject variable optical signal strength across specified wavelengths to test receiver threshold and saturation limits (Verification: Optical receiver sensitivity verified down to -23 dBm without video signal loss).
  • Video Resolution & Serial Data Loopback Test: The module is coupled to an optical test generator and PTZ telemetry source to confirm high-resolution color video output and error-free RS-485 data pass-through.
  • Environmental Thermal Burn-In: The unit undergoes an 18-hour continuous burn-in cycle at 60°C inside an environmental chamber while processing live video feeds.
  • Final Prep: Optical ST ports are fitted with protective anti-dust caps, edge connector pins are treated with electrical contact restorer, and the module is packaged inside static-shielded ESD packaging.

 

The Field Engineer’s Pitfall Guide

Fiber Ferrule Cleanliness & Receiver Saturation Hazard

Clean all ST optical fiber connectors with optical-grade wipes before plugging them into the GE S739DVR-RST1. Excessively strong optical signals on short fiber runs can saturate the receiver photodiode; use optical inline attenuators if input power exceeds maximum receiver limits.

❗ Incorrect Baud Rate / Data Protocol DIP Switch Alignment: Setting internal data configuration DIP switches for RS-232 while feeding an RS-485 telemetry bus prevents PTZ control signals from reaching the camera. Always mirror legacy hardware DIP switch settings before inserting the module into the chassis.

❗ Card-Edge Backplane Misalignment in Rack Cages: Forcing the S739DVR-RST1 card into an IFS rack enclosure off-angle can bend the rear backplane pin connectors. Always align the circuit card along top and bottom guide rails before firmly pushing home the locking lever.

❗ Un-torqued External Power Terminals (Standalone Installations): Loose power wire connections on standalone chassis models cause micro-brownouts that drop optical link synchronization. —In field deployments, I’ve seen a main security monitoring desk lose camera control intermittently simply because a screw terminal backed out under cabinet vibration.

 

Intent-Driven FAQ

What is the primary function of the GE S739DVR-RST1 receiver module?

The GE S739DVR-RST1 receives optical signals over fiber optic cabling and converts them back into analog composite video feeds for monitors/DVRs while handling bi-directional serial data streams for camera control.

Is the S739DVR-RST1 module rack-mountable?

Yes. The module is designed as an industrial card that slides directly into standard 19-inch IFS / GE fiber optic rack card cages, or operates as a standalone unit with an external power supply.

How do I verify if the optical link is properly established on the module?

Check the front-panel indicator LEDs (Verification: A solid green Optical Link / Carrier LED indicates healthy light reception from the remote transmitter; a dark or red LED points to a broken fiber, dirty connector, or excessive optical attenuation).

Can this module handle 2-wire RS-485 PTZ control systems?

Yes. The bi-directional data channel is hardware-configurable via onboard DIP switches to support RS-232, RS-422, and 2-wire or 4-wire RS-485 communication protocols.

What standard warranty is provided for surplus or reconditioned modules?

All reconditioned and factory-sealed surplus units carry a comprehensive 1-year replacement warranty covering optical receiving sensitivity, video bandwidth integrity, and serial data channel stability.

Business Card