ABB Module CI535V30 3BSE022162R1

Brand: ABB

Product Series: System 800xA / Advant OCS / Advant Controller 400 Series (AC 410 / AC 450)

Model: CI535V30 (Part Number / Ordering Code: 3BSE022162R1)

Product Type: Communication Interface Board / Protocol Submodule

ABB Module CI535V30 3BSE022162R1

Technical Parameters:

System Compatibility: Submodule expansion interface card designed for plug-in installation into main communication carrier modules (such as MB510 or dedicated subrack positions) inside ABB Advant Controller 400 series (AC 410 / AC 450) process control racks within ABB System 800xA and Advant OCS architectures.

Communication Protocol: Supports high-speed, deterministic proprietary system bus and serial protocols (including SPA bus / serial protocols) for dynamic data transfer and master/slave communication exchange.

Physical Interface: Multi-channel serial communication ports supporting standard RS-232C, RS-422, or RS-485 signal levels via external conversion units and dedicated subrack connection points.

Data Transmission Speed: Configurable serial baud rates optimizing real-time data throughput for fast scan cycles, event-driven data logging, and process alarm telemetry.

Network Capacity & Integration: Manages dynamic query loops, read/write message routing, and dataset passing between host controller databases and connected remote field nodes or auxiliary processing units.

Galvanic Isolation & Protection: Integrated optoelectronic isolation between channel logic and internal processing circuits to guard against high-voltage field transients and ground loops.

Operating Power Supply: Sourced directly through the main carrier module backplane connection (5 V DC logic rail and 24 V DC system power).

Diagnostic Telemetry: Integrated onboard LED status indicators displaying power state, operational health, active communication traffic, and channel fault alerts.

Environmental & Thermal Specs: Industrial-grade circuit board with IP20 enclosure protection when housed inside system subracks; operating thermal range from 0°C to +55°C (storage thermal range: -40°C to +70°C).

Physical Profile: Standard plug-in submodule form factor measuring approximately 53 mm (W) x 125 mm (H) x 260 mm (D) with a net weight of approximately 0.7 kg.

Industrial Sectors:

Chemical and Petrochemical Processing, Oil and Gas Exploration and Refining, Power Generation and Utilities, Water and Wastewater Infrastructure, Pulp and Paper Manufacturing, Heavy Metallurgy, and Large-Scale Industrial Process Automation.

Application Scenarios:

1. Advanced Controller-to-Device Telemetry Interfacing: Plugs into host Advant Controller 400 series communication racks to coordinate continuous data exchange between central DCS databases and remote field nodes.

2. Industrial Network Protocol Integration: Serves as a dedicated communication gateway to bridge auxiliary field instruments, smart protection relays, and analytical devices into the primary process control network.

3. Legacy DCS Plant Modernization & Maintenance: Applied during phased automation platform upgrades to expand serial communication capacity within existing Advant OCS installations without disrupting main field cabling.

4. Substation & Drive Control Networking: Connects central controllers to variable frequency drives, motor management relays, and power monitors to poll real-time operational status, diagnostic alarms, and parameter settings.