Description
B&R 5PC720.1505-01 | Panel PC 720 15-Inch Industrial Touch PC
Product Introduction
When space behind the control cabinet door is tight, mounting a separate box PC and running long video display cables isn’t always practical. The 5PC720.1505-01 solves this by integrating a high-performance industrial PC system engine directly onto the back of a 15.0-inch XGA color display panel. Serving as a complete, all-in-one HMI and real-time controller, it handles SCADA visualization, local database logging, and PLC fieldbus processing within a single enclosure cutout.
Engineered for harsh industrial environments, the front bezel achieves an IP65 ingress rating to protect against coolant spray, oil mist, and dust accumulation. The integrated unit incorporates an analog resistive touch overlay, modular drive bays (CompactFlash and slide-in hard drives), and PCI expansion slots for fieldbus interface cards. Replacing an aging or flickering Panel PC 720 with a bench-tested, genuine unit eliminates screen ghosting, touch alignment drift, and CPU lockups on critical processing lines.
5PC720.1505-01
Key Technical Specifications
| Parameter | Technical Specification |
| Manufacturer | B&R Industrial Automation |
| Part Code | 5PC720.1505-01 / 5PC720-1505.01 |
| Product Family | Panel PC 720 (PPC720) |
| Display Size & Type | 15.0-Inch Diagonal XGA Color TFT LCD |
| Native Resolution | 1024 x 768 Pixels |
| Touchscreen Type | 5-Wire Analog Resistive Touch Overlay |
| Supply Voltage | 24 VDC Nominal (±25% SELV isolated input) |
| Network Interfaces | 2x 10/100/1000 Mbit/s RJ45 Ethernet ports |
| Serial / USB Ports | 1x RS232 (9-pin DSUB), up to 4x USB 2.0 ports |
| Expansion Capabilities | PCI / PCIe expansion backplane options |
| Front Protection Rating | IP65 / NEMA 12 (When properly panel-mounted) |
| Operating Temperature | 0°C to +50°C (32°F to 122°F) |
Application Scenarios & Pain Points
Field Experience: A packaging facility in Texas had an automated palletizing cell go offline because the original Panel PC screen lost touch calibration every time the machine shed heat during afternoon shifts. Thermal fatigue had loosened internal ribbon connections on the display assembly. Swapping to a bench-tested 5PC720.1505-01 with verified touch-matrix voltage stability restored 100% input accuracy across all shifts.
- With Genuine 5PC720.1505-01: Crisp 1024×768 display clarity, sub-millisecond touch response with gloved hands, stable 24V power regulation, and seamless Automation Runtime execution.
- Without (Low-Tier Knockoff Screen Assembly): Delaminating touch layers, random video dropouts during motor startups, and lost fieldbus packets caused by poor bus shielding.
- Standalone Machine Control Hubs: Functions as both the HMI operator terminal and the real-time process controller on equipment like thermoformers, labelers, and CNC tools.
- High-Vibration Enclosures: Integrated, bracket-locked construction prevents cable vibration disconnects between the PC processor board and the display panel.
QA & Live Testing SOP (Trust Signal)
Every 5PC720.1505-01 unit pulled from our inventory undergoes a multi-point bench qualification routine prior to shipment:
- Bezel & Display Surface Audit: We inspect the front gasket, aluminum bezel, and resistive film under high lighting to verify zero deep scratches, punctures, or seal degradation.
- 24V Boot & Backlight Stress Test: Powered via a bench supply, the unit undergoes backlight uniformity checks, dead pixel scans, and current draw monitoring across varying brightness levels.
- Touch Matrix Calibration: Using native B&R diagnostic tools, a full 9-point grid calibration is conducted to confirm edge-to-edge accuracy and zero phantom touch triggers.
- I/O & Expansion Bus Test: Ethernet ports, USB slots, RS232 interfaces, and PCI backplane lanes are driven simultaneously under continuous data loops.
- Anti-Static & Heavy ESD Packaging: Verified units are cleaned with anti-static solution, sealed in ESD protective shielding, and packed into custom foam-lined shipping crates.
Field Engineer’s Pitfall Guide
- ❗ Match Internal CPU Engine Configuration: The 5PC720.1505-01 refers to the complete Panel PC housing and display assembly. Verify that the internal CPU board, RAM, and slide-in drive setup match your original unit to prevent BIOS boot or driver compatibility errors under Automation Runtime.
- ❗ Torque Rear Panel Clamps Uniformly: When securing the unit into a enclosure cutout, tighten the rear mounting clamps in an alternating cross pattern. Over-tightening clamps on one side warps the front aluminum frame, pinching the resistive touch screen and causing constant false inputs.
- ❗ Backup CompactFlash / Storage Media Before Swap: Always transfer your system CompactFlash card or hard drive from your old unit into the replacement chassis carefully. Ensure the card is pushed straight into the socket until the ejector mechanism seats completely.
Intent-Driven FAQ
Q: What is the main difference between an Automation Panel (AP) and a Panel PC (PPC) like the 5PC720.1505-01?
A: An Automation Panel (AP) is a display terminal that requires a remote industrial computer (IPC) to send it video and touch data. A Panel PC (PPC) like the 5PC720.1505-01 has a full industrial computer built directly onto the back of the screen.
Q: Can I operate the touch screen on the 5PC720.1505-01 while wearing industrial work gloves?
A: Yes. The 5PC720.1505-01 uses an analog resistive touch screen that responds to physical pressure, making it fully compatible with cloth, leather, and nitrile gloves.
Q: What power input is required to run this Panel PC?
A: The unit operates on a standard 24 VDC (±25%) power supply connected via a B&R 3-pin cage-clamp terminal connector plug.
Q: How do I access internal components like RAM or expansion cards?
A: Access panels on the rear aluminum chassis allow technicians to reach memory sockets, CompactFlash slots, the CMOS battery, and PCI expansion slots without dismounting the front display bezel.
Q: What condition are these units supplied in, and what warranty applies?
A: We provide fully bench-tested New Surplus and reconditioned original B&R units. Every 5PC720.1505-01 panel includes a 1-year functional replacement warranty and full QA test clearance.
