Description
B&R 5AP1130.156C-000 | Automation Panel 1000 15.6″ HD Display
Product Introduction
Modern automated processing lines and high-speed packaging cells require HMI surfaces that can present complex SCADA dashboards, live camera feeds, and alarm logs on a single screen. The 5AP1130.156C-000 fulfills this requirement by offering a 15.6-inch HD widescreen display (16:9 format) built on B&R’s robust Automation Panel 1000 architecture. Featuring an edge-to-edge scratch-resistant glass front, it provides fluid multi-touch performance—allowing line operators to pinch, zoom, and swipe through machine layouts as easily as on a consumer tablet.
Designed to pair with B&R Automation PCs (such as APC2100, APC2200, or APC3100) or Panel PCs, this unit interfaces via B&R’s Smart Display Link technology. Video, multi-touch input data, backlight controls, and system health status travel across a single cable line up to 100 meters away from the main IPC enclosure. Its IP65-rated front panel guards against coolant spray, oil mist, and washdown chemical exposure, ensuring smooth operator input even in hostile shop-floor environments.
5AP1130.156C-000
Key Technical Specifications
| Parameter | Technical Specification |
| Manufacturer | B&R Industrial Automation |
| Part Number | 5AP1130.156C-000 |
| Display Series | Automation Panel 1000 (AP1000) |
| Screen Size & Aspect Ratio | 15.6-Inch Widescreen (16:9) |
| Display Resolution | HD Color TFT LCD (1366 x 768 Pixels) |
| Touchscreen Technology | Projected Capacitive (PCAP) Multi-Touch Glass Surface |
| Interface Architecture | Modular Receiver Slot for Smart Display Link (SDL / SDL3 / SDL4) |
| Front Protection Rating | IP65 / NEMA 4X (When properly panel-mounted) |
| Operating Voltage | 24 VDC Nominal (Fed via link receiver / host IPC) |
| Operating Temperature | 0°C to +55°C (32°F to 131°F) |
| Front Construction | Edge-to-Edge Glass with Anodized Aluminum Housing |
Application Scenarios & Pain Points
Field Experience: A plastics extrusion machinery manufacturer in Illinois updated its operator stations from legacy 4:3 12-inch resistive screens to the 15.6-inch 5AP1130.156C-000. The widescreen format allowed them to keep real-time temperature trend graphs continuously visible alongside active extrusion controls. Operator input errors dropped by over 40% because technicians no longer had to toggle between hidden HMI sub-menus during temperature adjustments.
- With Genuine 5AP1130.156C-000: Crystal-clear 1366×768 widescreen resolution, scratch-resistant glass matrix, rapid single-cable SDL link connectivity, and multi-touch gesture capability.
- Without (Low-Grade Aftermarket Replacement): Unresponsive touch zones near screen borders, poor anti-glare coatings that wash out under overhead shop lighting, and communication dropouts across long receiver cable runs.
- Centralized SCADA Workstations: Ideal for complex machine cells requiring side-by-side display of live diagnostics, recipe databases, and trend logs.
- Washdown-Intensive Processing Skids: Smooth glass front prevents food particulate accumulation and withstands routine sanitization down to IP65 standards.
QA & Live Testing SOP (Trust Signal)
Every 5AP1130.156C-000 panel pulled from inventory passes through a rigorous bench testing procedure before being cleared for shipment:
- Glass & Housing Inspection: We inspect the front glass surface, edge gaskets, and aluminum rear framing under high-intensity lighting to confirm zero chips, micro-cracks, or seal gaps.
- 24V Bootup & Backlight Audit: Driven via an industrial power supply, the TFT panel undergoes backlight uniformity checks, dead pixel scans, and contrast sweeps across all brightness levels.
- Multi-Touch Matrix Calibration Test: Using native B&R diagnostic software, we test multi-touch registration across the entire 15.6-inch grid area to confirm zero dead zones or response lag.
- SDL High-Speed Link Data Sweep: Display video and touch feedback packets are continuously looped across the rear receiver interface to verify signal stability and packet integrity.
- Anti-Static Cleaning & ESD Packaging: Verified units are cleaned with specialized anti-static solution, wrapped in ESD shielding bags, and secured in custom foam-lined shipping boxes.
Field Engineer’s Pitfall Guide
- ❗ Ensure PCAP Glove Compatibility: Projected capacitive (PCAP) touch screens measure changes in electrical capacitance rather than physical pressure. Operators must use capacitive-compatible industrial gloves; heavy, thick leather work gloves will fail to trigger touch inputs.
- ❗ Match Smart Display Link (SDL) Receiver Generation: Verify that the transmitter board inside your Automation PC and the linking cable match the generation of the receiver module installed on the back of the 5AP1130.156C-000 (SDL vs. SDL3/SDL4). Mismatched link hardware will result in video handshake timeouts or a black screen.
- ❗ Torque Mounting Clamps Evenly: When securing the unit into a enclosure cutout, tighten the rear retaining clamps sequentially in a cross pattern to B&R’s specified torque rating. Uneven pressure can warp the aluminum bezel and create stress on the glass surface, leading to phantom touch triggers near the screen perimeter.
Intent-Driven FAQ
Q: What is the primary difference between the 5AP1130 series and older 5AP930 series panels?
A: The 5AP1130 series belongs to the Automation Panel 1000 family featuring modern 16:9 widescreen formats, HD resolution options, and projected capacitive (PCAP) multi-touch glass fronts, whereas older 5AP930 models typically use 4:3 aspect ratios and resistive single-touch overlays.
Q: Can I mount this 15.6-inch panel on a swing-arm mounting system?
A: Yes. In addition to standard panel cutout installation, the AP1000 series supports mounting onto compatible B&R swing-arm enclosures or standard VESA adapters using approved B&R bracket kits.
Q: Does the 5AP1130.156C-000 require an independent 24VDC power supply?
A: Power requirements depend on the rear receiver module installed. When using standard SDL receiver cards, power is supplied directly through the SDL cable from the host Automation PC. Other receiver configurations may utilize a dedicated 24VDC terminal block on the rear chassis.
Q: How do I safely clean grease and oil off the glass front during operation?
A: The flat glass front can be cleaned using standard isopropyl alcohol solutions, glass cleaners, or mild industrial detergent wipes. Avoid harsh abrasive pads that could degrade the anti-reflective surface treatment.
Q: What condition are these units supplied in, and what warranty is included?
A: We supply fully bench-tested New Surplus and reconditioned original B&R inventory. Every 5AP1130.156C-000 unit includes a 1-year functional replacement warranty and complete QA bench clearance.
