ABB PDR11-FBP.150 Termination Unit Profibus Dp 1SAJ924007R0001

Brand: ABB

Product Series: FBP FieldBusPlug Accessories / Fieldbus Interface Series

Model: PDR11-FBP.150 (Part Number: 1SAJ924007R0001)

Product Type: Profibus DP Active Termination Unit

ABB PDR11-FBP.150 Termination Unit Profibus Dp 1SAJ924007R0001

Technical Parameters:

Functionality: Provides active line termination for Profibus DP networks to ensure stable data transmission, preventing signal reflections at the end of the bus segment.

Supply Voltage: 24V DC (Operational range typically 19.2 to 31.2V DC)

Current Consumption: Low power draw, typically under 30 mA

Interface/Connection: Standard 9-pin D-sub (Sub-D) female connector or matching standard M12 FBP fieldbus connector configuration.

Data Rates: Supports all standard Profibus DP baud rates up to 12 Mbit/s automatically.

Mechanical Mounting: Standard 35mm DIN-rail mounting for quick control cabinet integration.

Diagnostic Display: Features integrated LED status indicators on the housing to verify power supply presence and termination health.

Enclosure Protection: IP20 rated rugged industrial housing.

Industrial Sectors:

Factory Automation, Water and Wastewater Treatment, Food and Beverage Processing, Chemical and Petrochemical Industries, Automotive Manufacturing, and Material Handling Logistics.

Application Scenarios:

1. End-of-Line Bus Stabilization: Installed at the absolute physical end of a Profibus DP network segment to maintain the required electrical impedance and clean digital square-wave signals across long distances.

2. Continuous Network Availability: Deployed as an active terminator so that even if the last field device (like a PLC node, drive, or soft starter) is powered down or disconnected for maintenance, the remaining network devices continue communicating without interruption.

3. High-Speed Communication Security: Implemented in complex production environments running at maximum baud rates (12 Mbps), where electrical noise and signal reflections can easily corrupt automated control data.

4. Decentralized I/O Systems: Integrated into distributed control cabinets alongside ABB FieldBusPlug-compatible motor controllers or remote I/O blocks to ground and terminate secondary communication lines safely.