Description
ABB 83SR03H-E GJR2342800R1578
ABB 83SR03H-E GJR2342800R1578 is a serial communication module in the ABB Procontrol P14 (also known as Advant Controller) automation system. It belongs to the 8000 series I/O product family and is mainly used for data exchange between controllers and external devices in industrial automation environments.
ABB 83SR03H-E GJR2342800R1578
This module provides 3 serial communication channels, supports RS232 and RS485 interface standards, can be configured as Modbus RTU master or slave mode, and also supports ASCII communication protocol. The module is connected to the Procontrol P14 controller via the Railbus serial data bus and is part of the 8000 series node architecture. Each I/O module location has a unique address and does not require module training during installation. This module also supports HART protocol transparent transmission function, which can be compatible with existing HART smart instruments while using fieldbus, suitable for factory upgrades and expansion scenarios.
In the system architecture, 83SR03H-E serves as a communication bridge between the controller and third-party devices such as the upper computer, frequency converter, intelligent instrument, barcode scanner, etc. The module is installed on DIN rails and wired with screw terminals. It has a protection level of IP20 and needs to be installed inside the control cabinet for use. The working environment meets industrial standards and can operate stably under harsh conditions such as vibration, temperature fluctuations, or electromagnetic interference.
In terms of physical specifications, the module size is compact, with a total weight of about 0.3 kilograms. It is produced in Sweden and has passed CE certification. The working voltage is 24V DC, and the working temperature range covers the industrial standard range.
Programming and configuration are completed through the engineering tool Procontrol P14, which fully complies with the IEC 61131-3 standard and supports programming languages such as instruction lists, functional block diagrams, ladder diagrams, etc.
It should be noted that the ABB Procontrol P14 series has been officially marked by ABB as gradually exiting the market and being replaced by the AC500 PLC platform. However, there are still a large number of equipment in use in the global stock industrial system, and the demand for 83SR03H-E as a key communication spare part still exists. At the same time, there are multiple revised versions of this series, such as 83SR03K-E, 83SR03H-ER1300, etc. When replacing, it is necessary to check the complete order number GJR2342800R1578 to ensure that the hardware logic and interface definitions are completely consistent.
